The 10 Most Dismal Saab 93 Key Fob FAILURES Of All Time Could Have Bee…

How to Replace a Saab 9-3 Key

The Saab 9-3 has a great amount of appeal for drivers. It offers good visibility and a strong performance engine. It also has a great safety rating.

It is essential to have two keys that work for your vehicle. If you lose only one key, it could be very costly to buy an additional one.

How to replace the ignition Key in the Saab9-3

You'll must replace your car key when it doesn't turn. This guide will show how to replace the ignition key on the saab fob key replacement 9-3. You will need a replacement key and a new battery that can be reprogrammed and a new key-fob cover.

Most modern Saab models use a transponder instead of a traditional key to unlock the vehicle and allow it to start. The reprogrammable batteries that are in the key-fob eventually become worn out and will not be able to hold charge. This is particularly applicable if you are using the same key for the lock you have.

A professional locksmith can change the battery fairly easily. If you have the proper tools and patience you can do it yourself. The first step is to remove the key-fob off. This is accomplished by inserting a flathead screwdriver into the slot located in middle of the case. You will need to take your time, as the plastic is extremely thin and is susceptible to damage.

Once the case is opened and you are able to prepare the new key by combining the lower portion of the old key with the banana and transponder on the new key. This will ensure that the new key is mated to the CIM properly, which could make a big difference when replacing the primary key for your Saab 9-3.

How do I replace the ignition Key on a Saab 900

If you don't have two keys, you will need remove the dashboard and saab 900 Key steering wheel to access the ignition. Start by disconnecting your negative battery cable. After the battery has been disconnected, you can remove all trim pieces and dashboard pieces that surround the steering wheel. Once the dash is removed, you can place an opening with a screwdriver behind the ignition switch.

The ignition cylinder is equipped with key locks that can prevent the car from starting if the key isn't inside it. If the ignition switch of your 900 isn't working, look at the key to determine whether it's in the lock or in the ignition barrel. It's also an excellent idea to rotate your keys regularly and clean them regularly so that they don't get bent.

saab replacement key programming cars differ from other cars in that they do not have traditional keys made of metal. Instead, the car recognizes electric signals from the key fob via an specialized microchip inside.

If you lose just one key fob that is working, your dealer will charge an additional fee to replace your computer module (also known as the CIM). We can reprogram the EEPROM of your computer to make it accept new keys without the need for replacement. This will save you over 50% of what the dealer charges! We call it the SAAB KEY PROGRAM. Find out more about it here!

How do you replace the ignition Key in the Saab9-5

The metal portion of a classic Saab key is simple to duplicate, and saab 900 key it's also not much of an impediment against theft of vehicles. The electronic component of the key-fob has an embedded chip that can identify the car when the key is inserted in the ignition switch.

Saab's anti-theft device has been relying on this technology for more than a decade. It's not quite as effective as a door lock however, it makes the theft of your car a lot harder. Every Saab owner needs to keep a spare Saab key in their car.

Most new Saabs come with two keys right from the factory, but you can add more at a dealer through a special handheld computer called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 models, which have more modern, newer features that require an ignition key.

The dealer will replace the CIM or TWICE module on those cars if all keys are lost. They'll charge you a high price for this. However, we can reprogram the EEPROM in your existing computer to accept new keys, and not replace the expensive modules.

How to replace the ignition Key in a Saab XC90

If your saab 900 key 9-3 key fob begins having problems turning the barrel of the lock It could be the time to replace it. The process is simple and you don't need to go to a dealership. You can do it at home using a few simple tools.

First, you'll need to prepare the new keys. Before you begin, ensure that the anti-theft system is disabled by placing blocks on the rear wheels, and then adjusting the handbrake. Place the key in the ignition and then turn the key to the "on" position. This will activate the accessories, but will not start the engine. Repeat this procedure five times and leave the key in the on position.

Then you'll need to buy a new case for your key fob. They are readily available at many auto parts stores and are usually very affordable. Depending on the model, you may even purchase them without electronic components.

To open the case simply push the screwdriver with a flathead into the slot in the middle. After you have split the case, you will be able to access all the internal electronics. Use a flathead screwdriver to gently pull out the electronic components.