17 Reasons Why You Should Ignore Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace, and they generally fit into frames that were previously in use very easily. However, if you have double pane windows that are held in place by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this situation it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric, not onto the floor, where they could be trampled.

Once the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional is able to come out and window replacement near me fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the gap is large, you may want to consider using a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, over time, they are susceptible to a range of issues like sliding. A sagging uPVC window can cause problems with light, draughts, and even security. It's important to take action as soon as you notice your uPVC windows are sagging.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows so you can access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in the right place.

If you aren't able to move the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. Often it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need close the window and perform an initial test to ensure that it fits. The corner joints of the sash need to be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you awake each day to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be accomplished by any DIYer who has the ability. Based on the severity of the issue the old caulking might need to be removed before a new layer of caulk is applied. It is crucial to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

Check that any drainage holes are free of debris in them and that the sill pan has been angled correctly to drain away from the window. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it blows open with the breeze. They can be repaired by any DIYer who is skilled and can be done within a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. Changing a window hinge is essentially a simple process, but it's simpler with someone else to help you hold the frame up.

Verify that the uPVC hinges are closed and open in the proper direction. This can be done by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or due to improper installation in the factory. This issue can be fixed by sending us a picture through our website and we will be happy to give you advice.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also lower the possibility of a window sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. Firstly the hinges, again due to wear and tear may become displaced, which causes a gap to form between the sash and the frame. They can be fixed by giving them a good cleaning, but if they are beyond repair it might be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge of the window, can also be misaligned, and again it may be feasible to give them a good clean, but in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and lessen the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. These will help to keep cold air out and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it could be more cost-effective to replace them instead of fixing them. If you are experiencing issues with your upvc window replacement near me it is recommended to speak with an expert as soon as possible.